Staff Directory


Nurul Sakinah Binti Engliman

Academic Qualification

  • Ph.D in Chemical and Process Engineering - Doctor of Philosophy, Universiti Kebangsaan Malaysia (UKM)
  • - Masters Degree, Universiti Putra Malaysia (UPM)

Nurul Sakinah Binti Engliman (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


sakinahengliman@iium.edu.my
3396


Professional Membership


  • 2019: Member of Profesional Body / Association: (Graduate Engineer), Board of Engineers Malaysia


Teaching Responsibilities


BIOCHEMICAL ENGINEERING FUNDAMENTALS 2019/2020 2018/2019
BIOTECHNOLOGY ENGINEERING LAB IV 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
CHEMICAL ENGINEERING LABORATORY 4 2023/2024
FINAL YEAR PROJECT II 2018/2019
Integrated Design Project 2018/2019
PRINCIPLE OF MASS AND ENERGY BALANCE 2023/2024 2022/2023 2021/2022
PRINCIPLES OF MASS AND ENERGY BALANCE 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
PROJECT I 2018/2019
SEMINAR 2018/2019
SEPARATION PROCESSES 1 2023/2024 2022/2023
SEPARATION PROCESSES I 2023/2024 2022/2023


Supervision


Lead Removal Using Modified Graphene Oxide Adsorptive Membrane.
Ph.D Completed 2022 Co-supervisor
Solid State Bioconversion System For The Production Of Myco-Coagulant For Water Treatment.
Ph.D In Progress Co-supervisor
Coaxial Electrospinning Of Fugal-Based Materials For Membrane Production.
Ph.D In Progress Co-supervisor
Green Synthesis Of Iron Oxide Nanoparticles For Biohydrogen Production Using Plant Extract.
Master Completed 2023 Main Supervisor
Investigation On The Compatibility Of Waste Cooking Oil (Wco) For Binder Modification And Its Performance In Porous Asphalt Mixture.
Master Completed 2023 Co-supervisor
Effect Of Stabilizer On Silver Nanoparticles That Immobilized On Activated Carbon Derived From Durian Skin For Methylene Blue Removal.
Master In Progress Co-supervisor
Robust Analysis Of Enhanced Photocurrent Of Fe304/Ti02 For Photoelectrochemical Cell(Pec) Impedimetric Detection.
Master In Progress Co-supervisor
Microclimate Condition And Hvac System Efficiency: Evaluation Of Indoor Air Quality (Iaq) In Naval Ships.
Master In Progress Co-supervisor
Analysis Ofammonium Concentration Using Tio2-Basedsensor System And Fuzzy Logic Approach.
Master In Progress Co-supervisor


Research Projects


Completed
2020 - 2023 Insight Analysis of Solid Waste Management during covid-19 Pandemic in Malaysia using Life Cycle Assessment (LCA)
2019 - 2023 Green synthesis of iron oxide nanoparticles for biohydrogen production via thermophilic anaerobic fermentation
On-Going
2023 - Present Scaling-up the production of nanocellulose (NC) from oil palm empty fruit bunches (OPEFB) by green chemicals assisting with ultrasonication
2022 - Present Robust Analysis of Enhanced Photocurrent of Fe3O4/TiO2 for Photoelectrochemical Cell (PEC) Impedimetric Detection
2022 - Present Investigation on method for immobilizing and germinating fungal mycelium spore using coaxial electrospinning for microplastic filtration system
2020 - Present Quantitative Analysis of Photogenerated Charge under UV-irradiation of Fe3O4/TiO2 in Photoelectrochemical Cell
2019 - Present Electroforced Sedimentation of Biosolids Using Moringa Oleifera Seed Powder as Renewable Dewatering Aid
- ASSESSMENT AND REHABILITATION OF SUNGAI PUSU BY BIO-NANOTECHNOLOGY APPROACH FOR WATER QUALITY IMPROVEMENT


Publications


Article

2024 Investigating the synthesis parameters of durian skin-based activated carbon and the effects of silver nanocatalysts on its recyclability in methylene blue removal. Discover Nano, 19 (32) pp. 1-23
2023 Biohydrogen production with utilisation of magnetite nanoparticles embedded in granular activated carbon from coconut shell. International Journal of Hydrogen Energy, 48 () pp. 11695-11708
2023 Effect of the lignocellulolytic substrates and fermentation process parameters on myco-coagulant production for water treatment. IIUM Engineering Journal, 24 (1) pp. 13-26
2023 Investigation of fouling mechanism on graphene oxide polyethersufone nanocomposite adsorptive membrane. Journal of Engineering Science and Technology, 18 (5) pp. 2672-2687
2023 Isolation and characterization of biohydrogen-producing bacteria for biohydrogen fermentation using oil palm biomass-based carbon source. Applied Sciences, 13 (1) pp. 1-18
2022 Development of data acquisition system for mobile ultraviolet (UV) monitoring device. JOURNAL OF INFORMATION SYSTEM AND TECHNOLOGY MANAGEMENT (JISTM), 7 (27) pp. 280-288
2022 Fabrication of Poly(Vinyl) Alcohol-Cellulose Nanocrystal hybrid aerogel. Materials Science Forum, 1074 () pp. 11-16
2022 Kinetic study on the effect of substrate and micronutrient inhibition during anaerobic fermentation of biohydrogen. International Journal of Current Science Research and Review, 5 (1) pp. 13-25
2022 Synergistic enhancement of biohydrogen production by supplementing with green synthesized magnetic iron nanoparticles using thermophilic mixed bacteria culture. International Journal of Hydrogen Energy, () pp.
2021 A systematic literature review on the effects of synthesis conditions to the physicochemical properties of activated carbons and their performance in methylene blue adsorption. Malaysian Catalysis-An International Journal, 1 (2) pp. 12-30
2021 Extraction of Phenolic Compound using Natural Deep Eutectic Solvent from Biomass Waste. IOP Conf. Series: Materials Science and Engineering, 1192 (012001) pp.
2021 Green synthesis of silver nanoparticles using coffee extract for catalysis. Malaysian NANO-An International Journal, 1 (2) pp. 13-25
2021 Physical and mechanical evaluation of porous asphalt incorporated with untreated and treated waste cooking oil. Malaysian Construction Research Journal, 14 (3) pp. 98-108
2021 Study of graphene oxide-polymer nanocomposite (GPN) adsorptive membrane for lead removal from wastewater. Journal of Engineering Science & Technology, () pp.
2020 Effectiveness of fouling mechanism for bacterial immobilization in polyvinylidene fluoride membranes for biohydrogen fermentation. Food and Bioproduct Processing, 120 () pp. 48-57
2019 Thermophilic biohydrogen production from palm oil mill effluent: Effect of immobilized cells on granular activated carbon in fluidized bed reactor. Food and Bioproduct Processing, 117 () pp. 231-240
2017 Influence of iron (II) oxide nanoparticle on biohydrogen production in thermophilic mixed fermentation. International Journal of Hydrogen Energy, 42 (45) pp. 27482-27493
Conference or Workshop Item

2023 Characterization of poly(vinyl) alcohol based aerogel assisted by cellulose nanocrystal. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2023 Enhanced removal of multi-metal ion by graphene oxide polyethersulfone nanocomposite adsorptive membrane. In: IIUM Engineering Congress 2023 (IEC ’23),
2022 Effect of stabilizers in the synthesis of silver nanoparticles and Methylene blue oxidation. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021),
2022 Indoor air quality (IAQ) in a naval ship after refit program: a time variation analysis. In: 1st International Conference of Air Quality and Climate Change, AQCC 2021 and 3rd Malaysia Air Quality Annual Symposium, MAQAS 2021,
2022 Microbial coagulant production for water treatment using different fermentative methods: a brief review. In: International Conference on Innovations in Science, Engineering and Technology 2022 (ICISET 2022),
2022 Screening of factors that influence the coagulation flocculation process of myco-coagulant produced in solid-state fermentation. In: 1st International Conference on Civil Engineering 2022(ICCE'22),
2022 Synthesis of Poly(vinyl) alcohol-cellulose nanocrystal hybrid aerogel. In: 2022 Fourth International Conference on Materials Science and Manufacturing Technology (ICMSMT 2022),
2021 Evaluation of solid-state production of myco-coagulant using various lignocellulosic. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021),
2021 Evaluation of solid-state production of mycocoagulant using various lignocellulosic media to reduce water turbidity. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021),
2020 Fabrication and characterization of graphene oxide-polymer nanocomposite membrane as adsorbent for lead removal. In: Kulliyyah of Engineering Research, Innovation and Commercialization Exhibition (KERICE),