Staff Directory


Siti Hajar Binti Yusoff

Academic Qualification

  • Engineering (Electrical/Electronic) - Doctor of Philosophy, University of Nottingham
  • Engineering (Electrical/Electronic) - Bachelor Degree, University of Nottingham

Siti Hajar Binti Yusoff (Assoc. Prof. Ts. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING

Other's position:

Deputy Director, Office of International Affairs


sitiyusoff@iium.edu.my
4531


Expert Profile


Dr Siti Hajar Yusoff a former student of Kolej Yayasan UEM (KYUEM), Lembah Beringin. She obtained first class with honours in her MEng Degree (First Class Hons) (Electrical Engineering) and Doctor of Philosophy in Electrical& Electronic Engineering from the University of Nottingham, UK. Currently, she is attached to the Department of Electrical and Computer Engineering. Her specialization is in the area of power electronics and nonlinear control systems. Her research interests include wireless power transfer in electric vehicles (EV), energy management systems, renewable energy, microgrid, and IoT


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Electrical and Electronic Engineering ~ Other Electrical and Electronic Engineering n.e.c. - Engineering (Electrical/Electronic)


Professional Membership


  • 2019 - 2020: Member of Profesional Body / Association: (member), Institute of Electrical and Electronics Engineers (IEEE)
  • 2019: Member of Profesional Body / Association: (Graduate Member), Instituition of Engineers Malaysia (IEM)


Teaching Responsibilities


AUTOMATON AND INSTRUMENTATION LAB 2023/2024
CONTROL SYSTEMS 2016/2017
ELECTRICAL AND COMPUTER ENG. LAB III 2022/2023 2021/2022 2020/2021
Electrical and Computer Eng. Lab- III 2020/2021 2019/2020 2018/2019 2017/2018
ELECTRICAL AND COMPUTER ENGINEERING LAB III 2018/2019 2017/2018 2016/2017
ELECTRICAL ENGINEERING LAB 2015/2016
ELECTRONICS 2015/2016 2014/2015
ENGINEERING INDUSTRIAL TRAINING 2019/2020 2016/2017 2015/2016
ENGINEERING LAB II 2015/2016
FINAL YEAR PROJECT 1 2019/2020
FINAL YEAR PROJECT I 2023/2024 2020/2021 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2021/2022
INTEGRATED DESIGN PROJECT 2021/2022
INTRODUCTION TO ELECTRICAL POWER SYSTEMS 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
POWER ELECTRONICS AND DRIVES 2023/2024 2022/2023
PROGRAMMING FOR ENGINEERS 2018/2019 2017/2018 2016/2017 2015/2016
PROJECT II 2018/2019
SEMINAR 2021/2022 2020/2021 2019/2020


Supervision


Self-Organizing Wireless Sensors Networks With Mcdm-Saw Clustered Routing, Anfis-Based Near-Ground Propagation, And Lm-Ann Adaptive Power Control.
Ph.D Completed 2023 Co-supervisor
Maximum Power Point Tracking Control Scheme For Small Scale Wind Turbine.
Ph.D Completed 2019 Co-supervisor
Equal Area Of Stepped Waveform Generation Technique For Multilevel Inverter .
Ph.D Completed 2019 Co-supervisor
Predictive Control Strategies Model In Islanded Microgrid With Renewable Energy Integration.
Ph.D In Progress Main Supervisor
Performance Analysis Of Model Predictive Control Based Energy Management System To Improve Energy Transmission.
Ph.D In Progress Main Supervisor
Model Predictive Control-Based Energy Management Framework For Isolated Microgrid.
Ph.D In Progress Main Supervisor
An Efficient Photovoltaic Power System For Renewable Energy Based On Combined Inverter And Dc Voltage Conditioner Hybrid Approach.
Ph.D In Progress Co-supervisor
Ai-Based Wireless Indoor Localization And Rf Signature Profiling For Physical Intrusion Detection.
Ph.D In Progress Co-supervisor
Classification Of Stress Level Using Deep Learning Algorithm Based On Electroencephalograph (Eeg) Signal.
Ph.D In Progress Co-supervisor
Predictive Model For River Bank Erosion Using Dimensional Analysis And Ensemble Method.
Master Completed 2023 Co-supervisor
Modeling Of Optimal Reconfigurable Microgrid For Electric Vehicle Integration.
Master Completed 2023 Co-supervisor
Design And Performance Analysis Of Flexible Microstrip Patch Antenna With Rubber Substrate At 2.45 Ghz.
Master Completed 2022 Co-supervisor
Integration Of Ac-Dc Hybrid Biomass-Solar Photovoltaic-Wind Turbine For Microgrid Application In Mersing .
Master Completed 2022 Co-supervisor
Multiple Coil Pair Geometric Designs For Inductive Wireless Power Transfer.
Master Completed 2021 Main Supervisor
Design Of Ferrite Core Based On Dynamic Wireless Power Transfer In Ev.
Master Completed 2019 Main Supervisor
Wireless Mobile Charger Circuit Design.
Master Completed 2019 Main Supervisor
Design Of Inductive Pad Coupler In Dynamic Wireless Power Transfer For Electric Vehicle.
Master Completed 2019 Main Supervisor
Design Of Efficient Algorithm For Waste Management.
Master Completed 2018 Main Supervisor
Energy Management System For Pv-Bess Islanded Microgrid Using Model Predictive Control.
Master In Progress Main Supervisor
Electricity Demand Forecasting In A Microgrid Utilizing Machine Learning Techniques..
Master In Progress Main Supervisor
Voltage Drop Model Analysis In Determining The Voltage Transformer For Grid Feeder.
Master In Progress Main Supervisor
Enhanced Visual Drone Detection Using Yolov8 Deep Learning Model.
Master In Progress Co-supervisor
Photovoltaic Power Generation Forecasting Using Deep Learning Algorithms.
Master In Progress Co-supervisor


Research Projects


Completed
2021 - 2021 National Electrical and Electronic (E&E) Roadmap 2021-2030
2020 - 2023 Modeling of Optimal Reconfigurable Microgrid for Electric Vehicle Integration
2020 - 2022 Model Predictive Control (MPC) for Energy Management System in micro grid.
2019 - 2023 Decision and Game Theory based Comprehensive Tactical Modelling of Node Misbehaviour for Threat Computing in MANET based IoT System
2019 - 2022 Structural Studies of Glass-Polymer Composite for More Robust Flexible Wearable Antenna via Injection Moulding Process
2019 - 2022 Highly Efficient Li-Ion Battery Recycling with capacity-sorted optimisation for secondary energy storage system
2017 - 2020 Modeling Novel Maximum power point Tracking Algorithm for Small Scale Wind Turbine System
2016 - 2018 Strategic Profiling and Analytic Modelling of Node Misbehaviour in Adhoc Networks Via Game Theory
2015 - 2019 Fundamental Study on the Current Distribution in Soil due to Impulse Discharge for Lightning Protection from Indirect Lightning
2015 - 2019 An Enhanced Modulated Predictive Control of AC/AC Converter for Wind Turbine to Reduce the Cost of Electricity
On-Going
2023 - Present Investigation of Partial Discharge Recognition Techniques under DC Stress with Superimposed Voltage Disturbance
2023 - Present Electrical and Mechanical Properties of Flexible Substrate Material via Additive Manufacturing for More Bendable Wearable Antennas
2022 - Present Antenna: How does it Work?
2022 - Present Energy Management System for RES and ESS Integration to the Islanded Microgrid
2021 - Present Space Radiation Effects on Optical Transceiver System of Satellite at Near Equatorial Low Earth Orbit


Award & Recognition


18 Sep, 2019 Bronze for Eco Friendly Portable Charger in KERICE - Kuliyyah of Engineering, IIUM KCDIO


Publications


Article

2024 Extendable high-gain DC-DC Converter for storage battery and photovoltaic cell. IIUM Engineering Journal, 25 (1) pp. 263-273
2023 Battery energy storage system (BESS) modeling for microgrid. IIUM Engineering Journal, 24 (1) pp. 57-74
2023 Indoor light energy harvesting technique to energize a heat sensor using polycrystalline solar panel. Bulletin of Electrical Engineering and Informatics, () pp. 3238 -3246
2023 Levenberg Marquardt artificial neural network model for self organising networks implementation in wireless sensor network. IET Wireless Sensor Systems, () pp. 1-14
2023 Model predictive control based energy management system literature assessment for RES integration. Energies, 16 (8) pp. 1-27
2023 Performance inspection of high gain chopper designed to extract optimum output of photovoltaic source. International Journal of Power Electronics and Drive Systems, 14 (4) pp. 2204-2216
2023 Self-Organized Wireless Sensor Network (SOWSN) for dense jungle applications. IEEE Access, () pp.
2023 Voltage control of hybrid energy sources for microgrid employing biomass-solar-wind. International Journal of Power and Energy Conversion, 13 (3-4) pp. 1-18
2023 Voltage instability and voltage regulating distribution transformer assessment under renewable energy penetration for low voltage distribution system. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 11 (3) pp. 673-684
2022 500W circular coil parameters mathematical design for wireless power transfer with ferrite core. International Journal of Interactive Mobile Technologies (iJIM), 16 (11) pp. 149-160
2022 A new topology of high-efficiency DC-DC hybrid boost SEPIC converter for PV cell. Asian Journal of Electrical and Electronic Engineering, 2 (2) pp. 1-10
2022 EEG signal analysis for mental stress classification: a review. Journal of Theoretical and Applied Information Technology, 100 (20) pp. 6199-6214
2022 Near ground pathloss propagation model using adaptive neuro fuzzy inference system for wireless sensor network communication in forest, jungle, and open dirt road environments. Sensors, 22 (9) pp. 1-18
2022 Optimal distribution network reconfiguration using multi-objective Cuckoo search algorithm. IIUM Engineering Journal, 23 (2) pp. 114-124
2022 Performance analysis on dynamic wireless charging for electric vehicle using ferrite core. IIUM Engineering Journal, 23 (1) pp. 46-59
2022 PI controller for hybrid biomass- solar photovoltaic- wind in microgrid: a case study of Mersing, Malaysia. IEEE Access, 10 () pp. 95151-95160
2022 Wearable smart phone sensor fall detection system. International Journal of Interactive Mobile Technologies, 16 (12) pp. 72-93
2021 Data bank: nine numerical methods for determining the parameters of weibull for wind energy generation tested by five statistical tools. International Journal of Power Electronics and Drive Systems (IJPEDS), 12 (2) pp. 1114-1130
2021 Design of circular inductive pad couple with magnetic flux density analysis for wireless power transfer in EV. Indonesian Journal of Electrical Engineering and Computer Science, 23 (1) pp. 132-139
2021 In-depth perception of dynamic inductive wireless power transfer development: a review. International Journal of Power Electronics and Drive System (IJPEDS), 12 (3) pp. 1459-1471
2020 A brief review: basic coil designs for inductive power transfer. Indonesian Journal of Electrical Engineering and Computer Science, 20 (3) pp. 1703-1716
2020 Investigation of magnetic properties for different coil sizes of dynamic wireless charging pads for electric vehicles (EV). IIUM Engineering Journal, 21 (1) pp. 23-32
2020 Novel technique for hill climbing search to reach maximum power point tracking. International Journal of Power Electronics and Drive System (IJPEDS), 11 (4) pp. 2019-2029
2019 Automatic household waste separation system based on resistance value and moisture content. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 501-507
2019 Classification of different types of metal from recyclable household waste for automatic waste separation system. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 490-500
2019 Energy and power estimation for three different locations in Palestine. Indonesian Journal of Electrical Engineering and Computer Science, 14 (3) pp. 1049-1056
2019 Energy efficient smart street light for smart city using sensors and controller. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 558-568
2019 Evaluation of wind power for electrical energy generation in the Mediterranean coast of Palestine for 14 years.. International Journal of Electrical and Computer Engineering (IJECE), () pp. 2212-2219
2019 Long range channel characteristics through foliage. Bulletin of Electrical Engineering and Informatics (BEEI), 8 (3) pp. 941-950
2019 Phase offset analysis of asymmetric communications infrastructure in smart grid. Elektronika ir Elektrotechnika, 25 (2) pp. 67-71
2019 Practical electrical energy production to solve the shortage in electricity in Palestine and pay back period. International Journal of Electrical and Computer Engineering (IJECE), 9 (6) pp. 4610-4616
2019 Recyclable waste separation system based on material classification using weight and size of waste. Bulletin of Electrical Engineering and Informatics, 8 (2) pp. 479-489
2018 Design of smart waste bin and prediction algorithm for waste management in household area. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2) pp. 748-758
2018 Neural network prediction for efficient waste management in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2) pp. 738-747
2018 Wide range modulation indexes featuring carrier-based PWM stepped waveform for half-bridge modular multilevel converters. IIUM Engineering Journal, 19 (2) pp. 1-231
2017 A computationally efficient P-LRU based optimal cache heap object replacement policy. International Journal of Advanced Computer Science and Applications (IJASA), 8 (1) pp. 128-138
2017 Predictive control of AC/AC matrix converter. International Journal of Power Electronics and Drive System (IJPEDS), 8 (4) pp. 1932-1942
2017 The combination of Newton-raphson method and curve-fitting method for PWM-based inverter. International Journal of Power Electronics and Drive System, 8 (4) pp. 31-43
Conference or Workshop Item

2024 Comparative analysis of MLP and CNN-LSTM models for solar power generation forecasting. In: IEEE 9th International Conference on Smart Instrumentation, Measurement and Applications (ICSIMA 2023),
2024 Performance comparison of a flexible circular microstrip patch antenna on various rubber-carbon compositions. In: 2023 IEEE INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION,
2024 Scheduling of the battery for peak shaving using Model Predictive Control (MPC). In: ICSIMA 2023 The 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications 2023,
2024 Using model predictive control in renewable energy sources. In: 9th IEEE International Conference on Smart Instrumentation, Measurement and Applications, ICSIMA 2023,
2023 Design and evaluation of a high-performance extensible DC-DC converter integrated with ANN based MPPT controller. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Development of high-performance Single Inductor Quadratic Multilevel DC-DC Step-Up Converter with MPPT Controller. In: 2023 3rd International Conference on Robotics, Electrical and Signal Processing Techniques (ICREST),
2023 Smart meter based on IoT platform. In: 2023 9th International Conference on Computer and Communication Engineering (ICCCE),
2023 Utilizing voltage drop model analysis to determine the optimal Voltage Regulated Distribution Transformer (VRDT) for grid feeders. In: 9th International Conference on Computer and Communication Engineering,
2022 A new high step-up DC-DC converter for photovoltaic application: switch inductor cell combined with voltage doubler circuit. In: 2022 International Conference on Recent Progresses in Science, Engineering and Technology (ICRPSET),
2021 Design and performance analysis of flexible microstrip patch antenna with rubber substrate. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Design of circular pad coupler of inductive power transfer for electric vehicle (EV). In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Design of U and I Ferrite Core On Dynamic Wirelesss Charging for Electric Vehicle. In: 8th International Conference on Computer and Communication Engineering, ICCCE 2021,
2021 Evaluation of Energy Harvesting for Smart Cane Application. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Integration of hybrid biomass-solar photovoltaic-wind turbine in microgrid application. In: 2021 8th International Conference on Computer and Communication Engineering (ICCCE),
2021 Machine Learning-Based Stress Level Detection from EEG Signals. In: 2021 IEEE 7th International Conference on Smart Instrumentation, Measurement and Applications,
2021 Mathematical Design of Coil Parameter for Wireless Power Transfer using NI Multisims Software. In: 8th International Conference on Computer and Communication Engineering, ICCCE 2021,
2021 Power prediction mode technique for Hill Climbing Search algorithm to reach the maximum power point tracking. In: 2nd International Conference on Electrical, Control and Instrumentation Engineering (ICECIE 2020),
2021 River phosphorus pollution sensory detection & quantification system. In: ICCCE 2021 International Conference on Computer and Communication Engineering 2021,
2021 Securing wireless communication using RF fingerprinting. In: 2021 8th International Conference On Computer Communication Engineering (ICCCE),
2021 Wearable based-sensor fall detection system using machine learning algorithm. In: 2021 8TH INTERNATIONAL CONFERENCE ON COMPUTER COMMUNICATION ENGINEERING (ICCCE),
2020 Design of flexible microstrip patch antenna using rubber substrate for brain tumor detection. In: 2020 18th IEEE Student Conference on Research and Development (SCOReD),
2020 Induced current distribution in 3D soil model as lightning impulse discharge strike earth surface. In: 9th International Conference on Power and Energy Systems (ICPES 2019),
2018 Analysis on smart waste management in Malaysia. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018,
2018 Automatic metal waste separator system in Malaysia. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018 Discrimination of residual and recyclable household waste for automatic waste separation system. In: 2018 7th International Conference on Computer and Communication Engineering (ICCCE),
2018 Energy management in IIUM library considering user behaviour. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018,
2018 Improved radiation characteristic of balanced antipodal vivaldi antenna in array configuration. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018,
2018 LoRa LPWAN propagation channel modelling in IIUM Campus. In: 2018 7th International Conference on Computer Communication Engineering (ICCCE2018),
2018 Material classification of recyclable waste using the weight and size of waste. In: 7th International Conference on Computer and Communication Engineering, ICCCE 2018,
2018 Modeling soil electrical conductivity under impulse discharge for electrical ground system. In: Eighth International Conference On Advances in Computing, Electronics and Electrical Technology - CEET 2018,
2018 Modulation indices embedded carrier-based PWM generation for modular multilevel converter. In: 2nd International Conference on Intelligent Systems Engineering (ICISE) 2018,
2018 Smart street light using intensity controller. In: 7th International Conference on Computer and Communication Engineering (ICCCE) 2018,
2017 Discharge current distribution in stratified soil under impulse discharge. In: The International Technical Postgraduate Conference (Tech-Post 2017),
2017 Harmonics elimination based on curve fitting method for modular multilevel converters. In: IEEE Region Ten Conference (Tencon) 2017,
2017 High voltage discharge profile on soil breakdown using impulse discharge. In: The International Technical Postgraduate Conference (Tech-Post 2017),
2017 The combination of Newton-Raphson method and curve-fitting method for PWM-based inverter. In: International Conference on Electrical and Electronic Engineering 2017 (IC3E2017),
2016 Stepped waveform generation for multilevel inverter topology applications. In: 6th International Conference on Computer and Communication Engineering (ICCCE 2016),
Book Section

2022 Energy security role of renewable and low-carbon technologies. In: Elsevier, ISBN: 9780128240847, pp. 39-56
2018 Trust and resource oriented communication scheme in mobile ad hoc networks. In: Springer, ISBN: 978-3-319-69265-4, pp. 414-430
Monograph

2018 Strategic Profiling and Analytic Modelling of Node Misbehaviour in Adhoc Networks via Game Theory. In: ,