Staff Directory


Norhashimah Bt. Mohd. Shaffiar

Academic Qualification

  • Doctor of Philosophy (Mechanical Engineering) - Doctor of Philosophy, Universiti Teknologi Malaysia (UTM)
  • Masters of Engineering (Mechanical-Advanced Manufacturing Technology) - Masters Degree, Universiti Teknologi Malaysia (UTM)
  • Bachelor of Engineering (Manufacturing) with Honours - Bachelor Degree, International Islamic University Malaysia

Norhashimah Bt. Mohd. Shaffiar (Assoc. Prof. Ir. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


shishaff@iium.edu.my
5751


Expert Profile


Assoc. Prof. Ir. Dr. Norhashimah binti Mohd Shaffiar, a graduate of the International Islamic University Malaysia (IIUM), Kuala Lumpur, started her career as an assistant lecturer at the IIUM in 2002 and is currently an Assoc. Professor in Manufacturing & Materials Engineering Department.
She obtained the Bachelor of Engineering (Manufacturing Engineering), Master of Engineering (Advanced Manufacturing Technology) and Degree of Doctor of Philosophy in Mechanical Engineering from University Technology Malaysia (UTM). Her areas of expertise and interests are in FEA, Damage Models, Fatigue Failure, Reliability of Microelectronic Components, Characterization of Advanced Materials, Mechanics of Composites and Nanocomposite.


Professional Membership


  • 2014: Member of Profesional Body / Association, Board of Engineers Malaysia
  • 2015: Member of Profesional Body / Association, Instituition of Engineers Malaysia (IEM)


Teaching Responsibilities


COMPUTER AIDED DRAFTING 2005/2006
COMPUTER AIDED DRAWING 2023/2024
ENGINEERING DESIGN AND PRODUCT DEVELOPMENT 2023/2024 2017/2018
ENGINEERING DRAWING 2012/2013
ENGINEERING MANAGEMENT I 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020 2018/2019
MANUFACTURING PROCESSES 2012/2013
PRODUCT DESIGN AND DEVELOPMENT 2017/2018 2016/2017
PROJECT & OPERATIONS MANAGEMENT 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
PROJECT AND OPERATIONS MANAGEMENT 2023/2024 2022/2023
PROJECT I 2019/2020 2018/2019 2017/2018 2016/2017
PROJECT II 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014
RAPID PROTOTYPING 2019/2020 2014/2015 2012/2013
SEMINAR 2012/2013
SEMINAR I 2012/2013
SEMINAR II 2012/2013
WORKSHOP TECHNOLOGY 2016/2017 2015/2016 2013/2014 2012/2013


Supervision


Characterization And Finite Element Analysis Of Halloysite Nanotube Reinforced Polylactic Acid/Polypropylene Carbonate For Fixation Plate In Mandibular Surgery.
Ph.D Completed 2023 Main Supervisor
Conflict Management In Engineering Construction: A Case Study Of Kuwait International Airport Cargo City.
Ph.D Completed 2019 Co-supervisor
Investigation On Mechanical Properties And Finite Element Analysis Of Hdpe/Epr Filled With Cnt Irradiated Nanocomposites.
Ph.D Completed 2018 Co-supervisor
Characterization And Finite Element Analysis Of Polylactic Acid/Polypropylene Carbonate (Pla/Ppc) For Fixation Plate In Mandibular Surgery .
Master Completed 2019 Main Supervisor
Effect Of Merging Road Design On Motorcyclists Behavior During Merging Onto Urban Expressway.
Master Completed 2018 Co-supervisor
Effect Of Nano-Clay On Mechanical And Thermal Stability Of Jute Composite For Structural Applications.
Master Completed 2016 Co-supervisor


Research Projects


Completed
2018 - 2022 Environmental-friendly durable concrete bricks made with waste for sustainable construction with utilizing waste materials from Dalia Industries.
2017 - 2019 Process Optimization and Characterisation of Novel Therapeutic Eluting Fiber via Melt Spinning/Extrusion Method for Biomedical Application
2017 - 2019 Characterization of Polylactic Acid/Polypropylene Carbonate Blend Applied in Fixation Plate for Mandibular Surgery
2014 - 2018 Wear Resistance Enhancement of Wind Turbine Blade Materials under Sand Impact
2013 - 2016 Modelling of High Performance Lightweight Nanocomposite Sport Shoes During Running
On-Going


Publications


Article

2022 Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1) pp.
2022 Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1) pp. 1-23
2021 A review on the Malaysian and Indonesian batik production, challenges, and innovations in the 21st century. SAGE Open, 11 (3) pp. 1-19
2021 Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1) pp. 201-212
2020 Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2) pp. 197-211
2020 Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11) pp. 2876-2886
2019 Experimental and finite element analysis of solvent cast poly (lactic acid) thin film blends. IIUM Engineering Journal, 20 (2) pp. 197-210
2019 Finite element analysis (FEA) of polylactic cid/polypropylene carbonate (PLA/PPC) blends fixation plate for craniomaxillofacial surgery. International Journal of Structural Integrity, 10 (5) pp. 678-691
2018 Effect of hatched marking length on entering position among motorcyclists during merging in expressway. Science Intaernational (Lahore), 30 (3 (May-June)) pp. 451-454
2018 Graphical vs. nongraphical displays: which one is the best labeling system for laboratory searching task?. Human Factors and Ergonomics Journal, 3 (1) pp. 26-33
2018 Relationship between merging lane length and motorcyclist’s head check behavior during merging in expressway. Sci.Int.(Lahore), 30 (3) pp. 461-466
2015 Energy cost optimization in high speed hard turning using simulated annealing algorithm. Advanced Materials Research, 1115 () pp. 104-108
2015 Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. Advanced Materials Research, 1115 () pp. 410-413
2015 Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. Advanced Materials Research, 1115 () pp. 414-417
2015 Flexing test of HDPE/EPR filled CNT radiated nanocomposites for sport shoe soles. Materials Testing, 57 () pp. 904 -908
2015 Matrix cracking in reinforced polymer nanocomposites: a review. Journal of Advanced Review on Scientific Research, 11 (1) pp. 13-36
2015 Multi objective optimisation for high speed end milling using simulated annealing algorithm . Advanced Materials Research, 1115 () pp. 113-116
2014 Surface roughness modeling in high speed hard turning using regression analysis. International Review of Mechanical Engineering, 8 (2) pp. 431-436
2012 Re-visiting the ‘rule of mixture’ used in materials with multiple constituting phases: A technical note on morphological considerations in austenite case study. Computational Materials Science, 65 () pp. 528-535
2011 Damage mechanics model for solder/intermetallics interface fracture process in solder joints. Key Engineering Materials, 462-63 () pp. 1409-1414
2006 Relationship of surface roughness with current and voltage during wire EDM. Journal of Applied Sciences, 6 (10) pp. 2317-2320
Conference or Workshop Item

2019 Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019,
2018 Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018),
2018 Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,,
2018 The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2015 Finite element analysis of HDPE/EPR-CNT nanocomposite under tensile loading. In: International Conference on Advanced Manufacturing and Materials Engineering 2014 (ICAMME 2014),
2015 Finite element analysis of tensile test for HDPE/EPR-MMT nanocomposite. In: 2nd International Conference on Advances in Manufacturing and Materials Engineering 2014 (ICAMME 2014),
2012 3D modeling of austenite based on real microstructure. In: 4th International Conference on Computational Methods (ICCM2012),
2012 Extended cohesive zone model for simulation of solder/IMC interface cyclic damage process in pb-free solder interconnects. In: Proceedings of the IEEE/CPMT International Electronics Manufacturing Technology (IEMT) Symposium,
2012 Fatigue failure processes in pb-free solder joints using continuum damage and cohesive zone models. In: Proceedings of the 2012 IEEE 14th Electronics Packaging Technology Conference, EPTC 2012,
2011 Damage progression in BGA solder joints during board-level drop test. In: 13th Electronics Packaging Technology Conference (EPTC 2011),
2010 Continuum damage evolution in pb-free solder joint under shear fatigue loadings. In: 12th Electronics Packaging Technology Conference,
2010 Progressive damage in Sn-4Ag-0.5Cu solder joints during flexural fatigue of a BGA package. In: 34th International Electronics Manufacturing Technology Conference (IEMT 2010),
Book

2014 Solder joint reliability assessment: finite element simulation methodology. Springer International Publishing, ISBN: 978-3-319-00091-6, 978-3-319-00092-3 (eBook)
Book Section

2012 Fatigue fracture process of lead-free solder joints in BGA package. In: Nova Science Publishers, ISBN: 978-1-61470-615-1, pp. 247-268