Staff Directory


Shafie Bin Kamaruddin

Academic Qualification

  • Ph.D in Manufacturing Engineering - Doctor of Philosophy, University of Birmingham
  • Master of Science (Manufacturing Engineering) - Masters Degree, International Islamic University Malaysia
  • Bachelor of Engineering (Manufacturing) - Bachelor Degree, International Islamic University Malaysia

Shafie Bin Kamaruddin (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


shafie@iium.edu.my
6539


Expert Profile


Dr. Shafie Kamaruddin, started his career as Testing Executive at SIRIM QAS International Sdn Bhd, a company providing testing and certification services, in 2009 after completing his Bachelor's degree from International Islamic University of Malaysia (IIUM). He was assigned at Fire Protection Section for approximately two years. Then, he obtained Master of Science Engineering (Manufacturing) from IIUM and Degree of Doctor of Philosophy in Mechanical Engineering from University of Birmingham (UK). He is currently an Assistant Professor in Manufacturing & Materials Engineering. His areas of expertise and interests are in Intelligent Optimization, Rapid Prototyping, and Manufacturing Automation.   


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Other Industrial and Manufacturing Engineering n.e.c. - Intelligent Optimisation


Professional Membership


  • 2019: Member of Profesional Body / Association: (Member), Board of Engineers Malaysia


Teaching Responsibilities


COMPUTER INTERGRATED MANUFACTURING (CIM) 2023/2024
ENGINEERING DESIGN AND PRODUCT DEVELOPMENT 2023/2024 2022/2023
ENGINEERING DRAWING 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
INTEGRATED DESIGN PROJECT 2021/2022
INTERGRATED DESIGN PROJECT 2022/2023 2021/2022 2020/2021 2018/2019
MANUFACTURING AUTOMATION 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
MANUFACTURING AUTOMATION ROBOTICS 2021/2022 2019/2020
MANUFACTURING ENGINEERING LAB III 2018/2019
MANUFACTURING ENGINEERING LAB II 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
MANUFACTURING ENGINEERING LAB IV 2023/2024
METROLOGY AND MEASUREMENT SYSTEMS 2020/2021 2019/2020
PROJECT I 2019/2020 2018/2019
Robotics in Manufacturing 2023/2024 2021/2022
SEMINAR 2018/2019
SMART MANUFACTURING 2023/2024
WORKSHOP TECHNOLOGY 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019


Supervision


Integration Of Theory Of Inventive Problem Solving (Triz) Into Value Analysis Value Engineering (Vave) During New Product Development (Npd) Phase.
Ph.D Completed 2023 Co-supervisor
A Generic Preventive Maintenance Framework Of Industrial Boiler Corrosion.
Ph.D Completed 2022 Co-supervisor
Study Of Printing And Post-Processing Of Inconel 718 Steel Using Fused Filament Fabrication.
Ph.D In Progress Main Supervisor
Improving The Bees Algorithm For Large Scale Optimization Problem.
Master In Progress Main Supervisor
Predicting Tribological Performance Of Liquid Lubricants And Coated-Surfaces Bymachine Learning Approaches.
Master In Progress Main Supervisor


Research Projects


Completed
2022 - 2023 Transferring Knowledge and Skills in Computer Numerical Control (CNC) and 3D Printing Technology to MCP Resources Sdn Bhd and Taman Matang Jaya Community via Hands-On Training
2021 - 2022 Development of Fused Deposition Modeling (FDM) System Extruder for Printing Tin Material
2020 - 2022 Elucidating mechanical and tribological properties of carbon-based coatings
2020 - 2022 Characterisation of Mechanical and Structural Properties of 3D Printed Metal Composite via Fused Deposition Modeling (FDM)
2020 - 2021 Design and Development of New Food Holder for Food Packaging Using 3D Printing Technology
2019 - 2023 Improving the Bees Algorithm for Large Scale Continuous Optimisation Problem
On-Going
2023 - Present Development of an Automated Solder Joint Defect Detection System
2022 - Present Food Security for People at Remote Area - Implementation of Symbiotic System of Fish and Vegetable Farming
2022 - Present Let's make things using 3D Printer
2007 - Present Advanced Manufacturing and Materials Technology Research Unit (AMTech)


Publications


Article

2023 Effects of coating and lubrication on friction and wear for metal-to metal application. Journal of Advanced Research in Applied Mechanics, 110 (1) pp. 52-62
2023 Properties and tribological evaluation of graphene and fullerene nanoparticles as additives in oil lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Special Issue: MYTRIBOS 2022 () pp. 1-10
2022 A review study on the effect of printing parameters of fused deposition modelling (fdm) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1) pp. 281-297
2022 A review study on the effect of printing parameters of fused deposition modelling (FDM) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1) pp. 281-297
2022 A short review on the effect of nozzle geometry in 3D printing process using FDM system. ASEAN Journal of Engineering and Technology (AJET), 2 (2) pp. 1-4
2022 Comparison study on mechanical properties of 3d printed pla and pla/aluminium composites using fused deposition modeling method. Malaysian Journal of Microscopy, 18 (1) pp. 1-11
2022 The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis. International Journal of Integrated Engineering, 14 (2) pp. 86-92
2021 Optimization of drilling path using the bees algorithm. Manufacturing Technology, 21 (6) pp. 1-7
2020 The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer. TEST Engineering & Management, 82 () pp. 8255 -8263
2020 The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling. Solid State Technology, 63 (5) pp. 866-874
2019 Application of the bees algorithm for constrained mechanical design optimisation problem. International Journal of Engineering Materials and Manufacture, 4 (1) pp. 27-32
2019 Bees algorithm enhanced with Nelder and Mead method for numerical function optimisation. AIP Conference Proceedings, 2129 () pp. 1-9
Conference or Workshop Item

2023 Design simulation and development of prototype filling nozzle in food industry. In: 8th Brunei International Conference on Engineering and Technology 2021,
2023 Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022,
2023 Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2022 Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication. In: 3rd Malaysian International Tribology Conference, MITC 2020,
Book Section

2022 Assembly sequence optimization using the bees algorithm. In: Springer, ISBN: 978-981-19-2094-3, pp. 423-433
2021 Analysis of printing parameters for tensile test using finite element analysis. In: Springer, ISBN: 978-981-16-0865-0, pp.
2021 Optimal design of step – cone pulley problem using the bees algorithm. In: Springer Nature Singapore Pte Ltd, ISBN: 978-981-16-0865-0, pp. 139-149