Staff Directory


Hafizah Hanim Binti Mohd Zaki

Academic Qualification

  • Advanced Manufacturing - Doctor of Philosophy, Universiti Sains Malaysia (USM)
  • Engineering Science - Masters Degree, University of Western Australia
  • Engineering (Materials) - Bachelor Degree, International Islamic University Malaysia

Hafizah Hanim Binti Mohd Zaki (Dr.)

Assistant Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


hafizahhanim@iium.edu.my
6573


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ Other Industrial and Manufacturing Engineering n.e.c. - Advanced Manufacturing


Teaching Responsibilities


ENGINEERING ECONOMICS AND MANAGEMENT 2023/2024
FAILURE ANALYSIS OF MATERIALS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019
FINAL YEAR PROJECT I 2019/2020 2018/2019
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
HEAT TREATMENT 2018/2019 2017/2018 2016/2017
HEAT TREATMENT AND MICROSTRUCTURE CONTROL 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
Integrated Design Project 2018/2019
MATERIALS ENGINEERING LAB 2 2023/2024 2022/2023 2021/2022
MATERIALS ENGINEERING LAB III 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018
MATERIALS SCIENCE AND ENGINEERING 2023/2024 2022/2023 2021/2022 2020/2021 2015/2016
MICROSTRUCTURAL CONTROL 2023/2024
MICROSTRUCTURALCONTROL 2018/2019
POWDER METALLURGY 2017/2018
SEMINAR 2017/2018 2016/2017 2015/2016
SMART MATERIALS 2023/2024 2022/2023 2021/2022 2020/2021 2019/2020 2018/2019 2017/2018 2016/2017 2015/2016


Supervision


Self-Healing Mechanism Of Nitinol Enhanced Zirconia Toughened Alumina Ceramic Insertsfor High-Speed Machining.
Ph.D In Progress Member Supervisory Committee
Investigation On The Effectiveness Of Diamond Reinforcement In Strenghthening Porous Aluminium.
Ph.D In Progress Co-supervisor
Assessment Of Corrosion On Buried Metallic Pipeline Induced By Ac Interference Below High Transmission Line.
Master Completed 2022 Co-supervisor
Surface Passivation Of Porous Niti Shape Memory Alloy Via Thermal Oxidation.
Master In Progress Main Supervisor


Research Projects


Completed
2019 - 2023 Surface Passivation of Porous NiTi Shape Memory Alloy via Thermal Oxidation for Bone Implant Application
2016 - 2020 The Study of Tropical Fruit Seeds as New Sources of Starch Based Biopolymers for Green Composites Applications
2016 - 2019 Solid State Synthesis on NiTi Shape Memory Alloy in Reducing Environment
On-Going
2022 - Present Filtration Mechanism of Bioactive High Amylose Mangifera Indica Starch/Polycaprolactone Electrospun Nanofibers for Biodegradable Facemask
2021 - Present Self Healing Mechanism of Nitinol (Ni60Ti40) Enhanced Zirconia Toughened Alumina (ZTA) Ceramic Cutting Tools for High-Speed Machining
2019 - Present Regeneration behaviour of nanosilica with concrete waste via natural self-healing route for capturing CO2


Publications


Article

2023 Improvement in effectiveness of diamond in strengthening the porous aluminium composite. Journal of Materials Research and Technology, 25 () pp. 25-37
2022 Biodegradation of mango seed starch films in soil. IIUM Engineering Journal, 23 (1) pp. 258-267
2022 High purity nano-silica from rice husk ash (RHA) via chemical methodas additive/stabilizing agent for CO2 capture application. Key Engineering Materials, 908 () pp. 373-378
2022 Porous NiTi shape memory alloy fabricated via powder metallurgy technique using pore forming agent. Key Engineering Materials, 908 () pp. 119-124
2022 Prediction and optimization on tribological behaviour of kenaf/carbon fiber reinforced epoxy matrix hybrid composites. Key Engineering Materials, 908 () pp. 3-8
2022 Size reduction via planetary milling and acid leaching effect on rice husk ash-derived nano-silica. Materials Today Proceeding, 66 () pp. 2786-2790
2021 Modeling humanizing education through newly reviewed materials engineering curriculum. IIUM Journal of Education Studies, 9 (3) pp. 63-79
2021 Preparatiion of CaO-based pellet using rice husk ash via granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp.
2021 Preparation of CaO-SiO2 adsorbent for potential CO2 capture via dry mixing method. Materials Science Forum, 1025 () pp. 343-348
2020 Characterization of NiTi shape memory alloy sintered at different temperatures in reducing environment. Materials Science Forum, 1010 () pp. 632-637
2020 The preparation of CaO-Based pellet using rice husk ash via f=granulation method for potential CO2 capture. IIUM Engineering Journal, 22 (1) pp. 234-244
2018 Comparison studies on phase formation and transformation behavior between Ni-Ti and Ni-TiH2 synthesized via solid state sintering. International Journal of Current Science, Engineering & Technology, 1 (special issue 1) pp. 464-470
2018 Effect of banana peel fiber as reinforcement in low density polyethylene/durian seed starch blends. International Journal of Current Research in Science & Technology, Special issue () pp. 191-196
2018 The effects of glycerol addition to the mechanical properties of thermoplastic films based on jackfruit seed starch [Kesan penambahan gliserol pada sifat mekanik filem thermoplastik berdasarkan kanji biji nangka]. Malaysian Journal of Analytical Sciences, 22 (5) pp. 892-898
2016 The role of CaH2 in preventing oxidation for the production of single-phase NiTi alloy in solid state. Journal of Alloys and Compounds, 655 () pp. 364-371
2015 A study of CaH2 effectiveness as oxidation prevention in solid state sintering of single phase NiTi alloy. Research Journal of Applied Sciences, 10 (1) pp. 28-32
2014 Comparison studies on solid state diffusion of Ni–Ti and Ni–TiH2 under CaH2 reducing environment. Materials Letters, 121 () pp. 36-39
Conference or Workshop Item

2023 Cement-based with partial replacement of nano-silica for improvement in compressive strength. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2023 Effect of pore forming agent on phase transformation behavior of porous NiTi shape memory alloy. In: Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering ICAMME 2022, 9—10 August, Kuala Lumpur, Malaysia,
2023 Microstructure and mechanical properties of porous aluminium composites reinforced with diamond particles. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME),
2023 Tailoring compressive properties of sintered porous NiTi Alloy for biomedical implant through pore forming agent. In: 11th International Symposium on Applied Engineering and Sciences (SAES2023),
2022 Assessment of corrosion on buried metallic pipeline induced by AC interference below high transmission line. In: 7th International Corrosion Prevention Symposium for Research Scholars, CORSYM 2021,
2020 Characterization of NITI shape memory alloy sintered at different temperatures in reducing environment. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2020 Estimating suitable starch extraction from mango seeds using analytical hierarchy process (AHP) method. In: 3rd International Conference on Advanced Materials Characterization Techniques (AMCT 2019),
2020 Preparation of nanosilica powder using rice husk via precipitation method. In: 3rd International Conference on Advanced Materials Characterization Techniques, AMCT 2019,
2019 Effect of acceptor impurity (Cu and Al) in Zn4Sb3 thermoelectric materials via hotisostatic pressing (HIP) method. In: Materials characterization using x-rays and related techniques,
2019 Effect of annealing temperatures on surface oxidation of Ti-50.8 at% Ni shape memory alloy. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2018,
2019 Sustainable lightweight composite materials. In: Tech Plan Demo Day in Malaysia 2019,
2018 Effect of different reducing agents on phase formation and transformation behaviour of Ni-Ti shape memory alloy. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
Book Section

2020 Two-step synthesis of ca-based MgO hybrid adsorbent for pontential CO2 capturing application. In: Trans Tech Publications Ltd, ISBN: 978-303571664-1, pp. 369-374