Staff Directory


Sharifah Imihezri Bt. Syed Shaharuddin

Academic Qualification

  • Engineering and Materials Design - Doctor of Philosophy, University of Nottingham
  • Mechanical Engineering - Masters Degree, Universiti Putra Malaysia (UPM)
  • Bachelor of Mechanical Engineering - Bachelor Degree, Universiti Putra Malaysia (UPM)

Sharifah Imihezri Bt. Syed Shaharuddin (Assoc. Prof. Dr.)

Associate Professor
IIUM Gombak Campus

KULLIYYAH OF ENGINEERING


shaimihezri@iium.edu.my
3465


Expert Profile


Dr. Sharifah Imihezri bt. Syed Shaharuddin started her career as a quality engineer at Sony Technology Malaysia, Bangi in 2000 upon completion of her B. Eng. (Hons) in Mechanical Engineering at University Tenaga Nasional, Kajang. She was appointed as an Assistant Lecturer by IIUM in 2004. She then pursued her MSc in Mechanical Engineering at University Putra Malaysia and successfully completed her study in 2005.
She then furthered her studies at the University of Nottingham, United Kingdom and successfully completed her Ph.D in Manufacturing and Materials Engineering. Currently, she is an Assistant Professor in the Department of Manufacturing and Materials Engineering, Kulliyyah of Engineering.


Area of Specialisation


  • Engineering Tech ~ Engineering And Technology ~ Industrial and Manufacturing Engineering ~ CAD/CAM/CAE Applications - Manufacturing Engineering, Biomedical Materials, Material Characterization, Glass Processing, Composite Manufacturing, Glass Processing


Teaching Responsibilities


Additive Manufacturing 2023/2024 2022/2023
COMPUTER AIDED DRAFTING 2006/2007
DESIGN OF MACHINE COMPONENTS 2015/2016 2014/2015 2013/2014 2012/2013
ENGINEERING DESIGN AND PRODUCT DEVELOPMENT 2023/2024 2022/2023 2021/2022 2020/2021 2018/2019 2017/2018
ENGINEERING DRAWING 2013/2014
FINAL YEAR PROJECT II 2023/2024 2022/2023 2019/2020
INTERGRATED DESIGN PROJECT 2019/2020 2018/2019
INTRODUCTION TO ENGINEERING WORKSHOP 2023/2024
MANUFACTURING ENGINEERING LAB III 2017/2018 2016/2017 2015/2016
MANUFACTURING LAB 3 2023/2024
MECHANICAL FORMING AND MACHINING OF MATERIALS 2013/2014 2012/2013
PRODUCT DESIGN AND DEVELOPMENT 2021/2022 2020/2021 2018/2019 2017/2018
PRODUCTION TOOLING 2022/2023 2021/2022
PROJECT & OPERATIONS MANAGEMENT 2022/2023 2021/2022
PROJECT I 2019/2020 2018/2019
RAPID PROTOTYPING 2023/2024 2022/2023 2021/2022 2020/2021 2018/2019 2017/2018
SEMINAR 2007/2008
SEMINAR I 2007/2008
WORKSHOP TECHNOLOGY 2020/2021 2018/2019 2017/2018 2016/2017 2015/2016 2014/2015 2013/2014 2012/2013


Supervision


Characterization And Finite Element Analysis Of Halloysite Nanotube Reinforced Polylactic Acid/Polypropylene Carbonate For Fixation Plate In Mandibular Surgery.
Ph.D Completed 2023 Co-supervisor
Study Of Printing And Post-Processing Of Inconel 718 Steel Using Fused Filament Fabrication.
Ph.D In Progress Co-supervisor
Characterisation And Processing Of Pla/Peg/Curcumin Microfiber Drawn Via Melt Spinning Method.
Master Completed 2022 Main Supervisor
Improvement Of Heated Bed'S Pin Strength Using Solidworks Simulation With Various Materials And Angles.
Master Completed 2020 Co-supervisor
Influence Of Post-Processing Techniques On 3d Printed Pla Copper Composite.
Master In Progress Co-supervisor


Research Projects


Completed
2021 - 2022 Development of Fused Deposition Modeling (FDM) System Extruder for Printing Tin Material
2018 - 2023 Investigation On the Effectiveness of Various 'Green' Batik Wax Blends Extruded via Fused Deposition Modeling (FDM).
2018 - 2022 Environmental-friendly durable concrete bricks made with waste for sustainable construction with utilizing waste materials from Dalia Industries.
2017 - 2019 Process Optimization and Characterisation of Novel Therapeutic Eluting Fiber via Melt Spinning/Extrusion Method for Biomedical Application
2017 - 2019 Characterization of Polylactic Acid/Polypropylene Carbonate Blend Applied in Fixation Plate for Mandibular Surgery
2013 - 2016 Characterisation and Dissolution Study of Novel Biodegradable Phosphate Based Glass for Biomedical Application
On-Going
2022 - Present Food Security for People at Remote Area - Implementation of Symbiotic System of Fish and Vegetable Farming
2021 - Present Formulation of a Numerical Model of Insertion and Retention Force in Cantilever Hook Snapfit Joint
2015 - Present Investigation on a Novel Nondestructable Composite Materials for the Development of Disaster Rescue Box


Publications


Article

2024 PVA-PEG hydrogel incorporated with cellulose nanofibril of oil palm empty fruit bunches and antibacterial agent curcumin. Journal of Pharmacy, 4 (1) pp. 116-128
2022 A review study on the effect of printing parameters of fused deposition modelling (fdm) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1) pp. 281-297
2022 A review study on the effect of printing parameters of fused deposition modelling (FDM) metal polymer composite parts on mechanical properties and surface roughness. Malaysian Journal of Microscopy, 18 (1) pp. 281-297
2022 A short review on the effect of nozzle geometry in 3D printing process using FDM system. ASEAN Journal of Engineering and Technology (AJET), 2 (2) pp. 1-4
2022 Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1) pp.
2022 Application of house of quality in the conceptual design of batik wax extruder and printer. IIUM Engineering Journal, 23 (1) pp. 1-23
2022 Comparison study on mechanical properties of 3d printed pla and pla/aluminium composites using fused deposition modeling method. Malaysian Journal of Microscopy, 18 (1) pp. 1-11
2022 The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis. International Journal of Integrated Engineering, 14 (2) pp. 86-92
2021 A review on the Malaysian and Indonesian batik production, challenges, and innovations in the 21st century. SAGE Open, 11 (3) pp. 1-19
2021 Characterisation and production of Poly (Lactic/Acid)/poly (Ethylene Glycol) microfiber via melt drawn spinning process. IIUM Engineering Journal, 22 (1) pp. 201-212
2021 Characterization and melt spinning of poly (lactic acid)/poly (ethylene glycol) blends. IIUM Engineering Journal, 22 (1) pp. 201-212
2021 Implementation of 3D Printing Technology in the Food Industry. Scientific Review, 7 (4) pp. 50-54
2021 Product design requirements for Kelulut hive. E-Bulletin TACTIC, () pp. 1-17
2021 Towards smart & sustainable farming of Kelulut at IIUM. E-Bulletin TACTIC, 1 () pp. 1-17
2020 Effect of spinning parameters on PLA/PPC/curcumin microfiber diameter: an investigation via response surface methodology. IIUM Engineering Journal, 21 (2) pp. 197-211
2020 Mechanical, morphological, thermal properties and hydrolytic degradation behavior of polylactic acid/polypropylene carbonate blends prepared by solvent casting. Polymer Engineering and Science, 60 (11) pp. 2876-2886
2019 Effect of cinnamon extraction oil (CEO) for algae biofilm shelf-life prolongation. Polymers, 11 (1) pp. 1-10
2019 Experimental and finite element analysis of solvent cast poly (lactic acid) thin film blends. IIUM Engineering Journal, 20 (2) pp. 197-210
2017 Optimization of milling carbon fibre reinforced plastic under chilled air machining. Advances in Material & Processing Technologies, () pp.
2017 Study on tool wear during milling CFRP under dry and chilled air machining. Procedia Engineering, 187 () pp. 78-89
2015 Core/clad phosphate glass fibres containing iron and/or titanium. Biomed. Glasses, 1 (1) pp. 20-30
2015 The glass transition temperature of iron and titanium containing phosphate based glasses. Advanced Materials Research, 1115 () pp. 178-181
2015 Viscosity profiles of phosphate glasses through combined quasi-static and bob-in-cup methods. Journal of Non-Crystalline Solids, 408 () pp. 76-86
Conference or Workshop Item

2023 Design simulation and development of prototype filling nozzle in food industry. In: 8th Brunei International Conference on Engineering and Technology 2021,
2023 Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering, ICAMME 2022,
2023 Review on fused deposition modelling extruder types with their specialities in filament extrusion process. In: 5th International Conference on Advances in Manufacturing and Materials Engineering (ICAMME2022),
2021 Modelling the effect of Dammar additions on the mass loss response of soy wax/ Beeswax/ Dammar blends via response surface methodology. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021),
2021 Modelling the effect of dammar additions on the mass loss response of soy wax/beeswax/dammar blends via response surface methodology. In: 6th International Conference on Biotechnology Engineering (ICBioE 2021),
2021 Performance of low-cost 3D printer in medical application. In: Manufacturing Science and Engineering Conference ( Virtual Conference ),
2019 Characterization of poly (lactic acid) _ poly (ethylene) glycol blends prepared for melt drawn spinning process. In: 6th International Conference on Recent Advances in Materials, Minerals and Environment (RAMM) 2019,
2018 Effect of thermoplastic polyurethane (TPU) on the thermal and mechanical properties of polylactic acid (PLA)/ curcumin blends. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2017),
2018 Finite element analysis on deformation of stretchable electronic interconnect substrate using polydimethylsiloxanes (PDMS). In: International Conference on Advances in Manufacturing and Materials Engineering 2017, ICAMME 2017,
2018 Miscibility, mechanical, and thermal properties of polylactic acid/polypropylene carbonate (PLA/PPC) blends prepared by melt-mixing method. In: 6th International Conference on Recent Advances in Materials, Minerals & Environment (RAMM 2018),
2018 Morphologies and mechanical properties of polylactic acid / polypropylene carbonate (PLA/PPC) blends by solvent casting method. In: International Conference Biotechnology Engineering, ICBioE ‘18 September 19-20, 2018,,
2018 The optimization study on the tool wear of carbide cutting tool during milling Carbon Fibre Reinforced (CFRP) using Response Surface Methodology (RSM). In: International Conference on Advances in Manufacturing and Materials Engineering 2017 (ICAMME17),
2017 Optimization of milling carbon fiber reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference 2017,
2017 Optimization of milling carbon fibre reinforced plastic using RSM. In: Advances in Material & Processing Technologies Conference (AMPT 2016),
2017 Thermal modelling and analysis of batik canting design. In: Advances in Materials and Processing Technologies Conference (AMPT 2017),
2017 Thermal, structural and mechanical properties of melt drawn cur-loaded poly(lactic acid) fibers. In: "Advances in Material and Processing Technologies Conference, AMPT 2017",
2017 Thermal, structural and mechanical properties of melt drawn curloaded poly(lactic acid) fibers. In: Advances in Material & Processing Technologies Conference 2017(AMPT 2016),
2016 Investigation on the thermal properties, density and degradation of quaternary iron and titanium phosphate based glasses. In: 2nd International Manufacturing Engineering Conference and 3rd Asia-Pacific Conference on Manufacturing Systems (IMEC-APCOMS 2015),
Book

2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer Nature, ISBN: 978-981-19-9508-8
2023 Proceeding of 5th International Conference on Advances in Manufacturing and Materials Engineering. Springer, ISBN: 978-981-19-9508-8